{
  "result": "PASS_DISTINCT_OFFLINE_BOOTSTRAP_READER_DECISION",
  "date": "2026-11-18",
  "pages": 62,
  "rows": [
    {
      "url": "https://audiotomidinow.com/",
      "title": "MP3 to MIDI Converter for Single-Note Melodies | AudioToMidiNow",
      "h1": "MP3 to MIDI for Single-Note Melodies",
      "firstAnswerParagraphs": [
        "To convert MP3 to MIDI, add a short recording of one instrument, use Local note transcription, inspect the draft notes and download the .mid file; the original single-note detector is also available. Current measured scope .",
        "Compare the real recorded inputs and the actual downloaded MIDI files below before deciding what to edit. Evidence .",
        "No sign-up. No file upload. Conversion runs in this tab."
      ],
      "sha256": "743705b34751b333ea4949133131e52949a3cab0c7f90a86dd89d8576e3e5b0c"
    },
    {
      "url": "https://audiotomidinow.com/mp3-to-midi-single-note-guide/",
      "title": "MP3 to MIDI: A Guide for Single-Note Melodies | AudioToMidiNow",
      "h1": "MP3 to MIDI: A Guide for Single-Note Melodies",
      "firstAnswerParagraphs": [
        "This method performs monophonic pitch detection, one note at a time; simultaneous polyphonic transcription requires a different processing path. The measured mode comparison and the unchanged detector document that scope.",
        "An MP3 stores recorded sound. A MIDI file stores musical instructions such as note pitch, timing, duration, and velocity. The software must therefore listen to the recording, infer the notes, and rebuild them as MIDI events. This detector follows one estimated pitch at a time; isolating an instrument does not make its simultaneous chords monophonic, and exported notes still require checking.",
        "If you want MP3 to become WAV or MP4 to become MP3, you need an audio-format converter; this site does not perform those format changes. If you want an MP3 melody as editable .mid notes, use the browser-based MIDI converter here, then check the exported notes against the recording."
      ],
      "sha256": "bc23da3152b330f9c593858da9878ba6c86cdbb8a0efd9af41d9093c6c39bea5"
    },
    {
      "url": "https://audiotomidinow.com/mp3-to-midi-single-note-workflow/",
      "title": "MP3 to MIDI Converter: Single-Note Silence Test | AudioToMidiNow",
      "h1": "MP3 to MIDI Converter: A Single-Note Silence Test",
      "firstAnswerParagraphs": [
        "For a single-note MP3 to MIDI conversion, compare pitches, starts and endings after adding or removing silence; identical retained audio was not enough to keep the exported notes identical in our recorded control. Data",
        "This method performs monophonic pitch detection, one note at a time; simultaneous polyphonic transcription requires a different processing path. Data",
        "We encoded a real GuitarSet microphone excerpt from 12.12 to 16.86 seconds once at 192 kb/s and decoded it once to 44,100 Hz signed-16-bit PCM, then made WAV copies for cropped and zero-padded diagnostics. Data"
      ],
      "sha256": "cf4b5a6a0754c0152ee24f8480538c8586fa70cf542f348da7eb3683cb664d00"
    },
    {
      "url": "https://audiotomidinow.com/midi-file/",
      "title": "MIDI File: Check an MP3-to-MIDI Export Before Editing | AudioToMidiNow",
      "h1": "MIDI File: How to Check an MP3-to-MIDI Export Before You Edit It",
      "firstAnswerParagraphs": [
        "A MIDI file is an editable sequence of note events, not a recording of sound. If yours came from an MP3 conversion, the narrower question is: does the downloaded .mid open, and do its notes match the original recording? Open it, inspect the notes and timing, then listen against the MP3. A structurally valid file can still contain the wrong melody.",
        "As a reproducible structure check, I ran this site's MIDI exporter with two known notes on this Windows machine. It produced a 51-byte file beginning MThd : Format 0 , one track , 480 ticks per quarter note , and an MTrk declaring 29 bytes that matched the actual track data. That confirms this known-note file's structure—not how accurately an MP3 was transcribed.",
        "If you need to make a MIDI file from an isolated melody, use the browser-based converter . If you need to decide which audio converts well, see the conversion guide . For a file you already downloaded, use the four-pass check below."
      ],
      "sha256": "a685f1052cb2290f1c9210ed79394f01b4436522a9d83b34bdc5d6ccd295598d"
    },
    {
      "url": "https://audiotomidinow.com/midi-to-sheet-music/",
      "title": "MIDI to Sheet Music: Import a MIDI File and Fix a Messy Score | AudioToMidiNow",
      "h1": "MIDI to Sheet Music: Import a MIDI File and Fix a Messy Score",
      "firstAnswerParagraphs": [
        "To turn a MIDI file into readable sheet music, open the .mid in a notation editor, inspect the imported staff, correct its rhythm and notes against the source audio, then export the score from that editor. AudioToMidiNow exports a MIDI draft, not finished sheet music, PDF, or MusicXML. If the score has strange ties, triplets, missing pauses, or separate notes where you played one slide, compare the MIDI with the audio first: the error may already be in the MIDI.",
        "This is also the workflow if you search for how to convert MIDI to sheet music : MIDI supplies timed note events; a notation editor makes the score. In my controlled test, MuseScore imported all three files, but one repeated-note phrase became tied and triplet rhythms, and one continuous slide had already become two fixed pitches before import.",
        "On this Windows machine I generated three short mono 44,100 Hz sine-wave WAV files. I passed their audio samples through this site's actual downsampling, note detection, and MIDI export code at balanced sensitivity, then imported the resulting .mid files into MuseScore Studio 4.7.5 and exported score images and MusicXML. I retained the source segments, detected notes, MIDI files, and rendered scores for comparison. This test bypassed the browser WAV decoder and UI; it does not measure performance on a recorded song."
      ],
      "sha256": "8527b5a2bd155af1538a1300a05190b26180654be96577dbc99e8817937e0f1f"
    },
    {
      "url": "https://audiotomidinow.com/change-mp3-to-midi/",
      "title": "Change MP3 to MIDI: Single-Note Source-History Tests | AudioToMidiNow",
      "h1": "Change MP3 to MIDI: Single-Note Source-History Tests",
      "firstAnswerParagraphs": [
        "To change MP3 to MIDI, add a clear single-note recording to the browser converter, press Convert to MIDI and inspect the downloaded notes; if you have the original recording, compare it directly instead of expecting a WAV copy or a higher-bitrate resave to restore the same draft. Data",
        "This method performs monophonic pitch detection, one note at a time; simultaneous polyphonic transcription requires a different processing path. Data",
        "We took four consecutive five-second windows, A through D, from the first twenty seconds of one archived human GuitarSet microphone recording, fixing the windows before conversion and using no synthesized replacement instrument. Data"
      ],
      "sha256": "92bbcaf73cb7c835017bbff8510e76c6d39cebadbbc79196e5456b327e193b25"
    },
    {
      "url": "https://audiotomidinow.com/convert-mp3-file-to-midi/",
      "title": "Convert an MP3 File to MIDI: Recovering a Quiet Note | AudioToMidiNow",
      "h1": "Convert an MP3 File to MIDI: What If One Note Is Too Quiet?",
      "firstAnswerParagraphs": [
        "If a quiet note vanishes when you convert an MP3 file to MIDI, try “More notes” and compare the new draft with the recording. In a controlled four-note MP3 on this site, Cleaner and Balanced each returned three notes; More notes recovered the deliberately quiet second note. It also uses a looser detection threshold, so inspect the whole result for extras before downloading.",
        "Choose your MP3 in the local browser converter , start with Balanced, inspect the piano roll, then change just the sensitivity if a note is missing. This page tests that specific missing-note decision. The separate format test asks whether different MP3 bitrates changed timing for a different, even-volume clip; it does not answer what happens to a weak note.",
        "On September 25, 2026, I generated a 2.4-second mono WAV at 44.1 kHz with four separate sine-wave pitches: MIDI 60, 64, 67, and 72. Each began at 0.00, 0.60, 1.20, and 1.80 seconds and lasted 0.45 seconds. The second note's amplitude was 0.012 while the other three were 0.35—about 29 times smaller in sample amplitude. I encoded the single WAV as a 192 kb/s MP3 using FFmpeg/libmp3lame. I decoded that MP3 to float PCM with FFmpeg, then called the site's unchanged downsampling, detection, and MIDI-writing functions once for each sensitivity setting. This is a test of the real detector code, but not a test of the browser's AudioContext decoder or file-picker interface."
      ],
      "sha256": "a5e9048dd64a37269ff050e2e6db780638c00f0eb938e47219dd82a5891ee87f"
    },
    {
      "url": "https://audiotomidinow.com/non-ai-audio-to-midi/",
      "title": "Does Anyone Know an Audio-to-MIDI Program That Doesn't Use AI? | AudioToMidiNow",
      "h1": "Does Anyone Know an Audio-to-MIDI Program That Doesn't Use AI?",
      "firstAnswerParagraphs": [
        "Yes. A non-AI audio-to-MIDI program can estimate pitch from repeating waveform patterns and write the detected notes as MIDI events. This site's browser converter follows that kind of deterministic path. It is intended for one clearly audible note at a time; it does not separate a full band into reliable individual parts. “Non-AI” describes the method, not a promise of better accuracy.",
        "If you want to avoid a model-based transcription service, try a short solo melody in the local converter , inspect the resulting notes, and keep the source audio for comparison. If you want every instrument from a finished song, this particular single-pitch tool is not the right answer. The main guide explains general MP3-to-MIDI choices; this page answers the narrower question of how to identify and use a non-AI path.",
        "I inspected the conversion path in this site's published /script.js on September 26, 2026. The file picker supplies the selected audio bytes to the browser's AudioContext.decodeAudioData . The code averages channels into a mono track, downsamples it, and analyzes short frames. For frames above a loudness gate, autoCorrelate looks for a repeating waveform period; the code maps its estimated frequency to the nearest MIDI pitch and groups adjacent frames into note events. buildMidi then serializes those events into a downloadable .mid ."
      ],
      "sha256": "ef67aef5f44f6a62840bca98fdd65636cc971ff28142b41a965144a205586fa9"
    },
    {
      "url": "https://audiotomidinow.com/convert-mp3-into-midi-music-box/",
      "title": "Convert MP3 into MIDI for a Music Box: The Paper-Strip Step",
      "h1": "Convert MP3 into MIDI for a Music Box: Why MIDI Is Only Step One",
      "firstAnswerParagraphs": [
        "Yes, an MP3 can be transcribed to MIDI as a starting point, but a MIDI file is not a ready-to-feed paper strip. First check the notes, then use a paper-strip workflow that matches your music-box mechanism: its available pitches, note spacing, strip dimensions, and print or punch format. A normal audio-to-MIDI converter creates note events; it does not decide which holes your particular box can play.",
        "That distinction matters because a paper-strip mechanism reads hole positions as notes. A strip editor therefore has to map MIDI pitches and timing onto the physical box, and may flag notes the mechanism cannot play or repeated notes placed too close together. See the mechanism explanation and an editor's MIDI-import and strip workflow documentation .",
        "Suppose a short MP3 melody becomes MIDI, but one note falls outside the box's supported range and two repeated notes are too close for its feed mechanism. The MIDI may still open perfectly in a DAW: that only confirms that the file can be read. It does not make those events physically representable on the strip. Catching the range and spacing issues in the editor lets you transpose, simplify, or lengthen the phrase before printing; otherwise, the printed holes can be neat and still play the wrong tune."
      ],
      "sha256": "62f18ef210a4d4649b00457d6a7a6f581c391997f9f015852aac5e443eb43fa2"
    },
    {
      "url": "https://audiotomidinow.com/voice-to-midi/",
      "title": "Voice to MIDI: Does It Keep Your Lyrics or Your Voice? | AudioToMidiNow",
      "h1": "Voice to MIDI: Does It Keep Your Lyrics or Your Voice?",
      "firstAnswerParagraphs": [
        "A pitch-based voice-to-MIDI converter turns the notes it detects in a sung line into MIDI note events—the melody, not the singer’s voice or lyric words. A Standard MIDI File can carry lyric text as a separate metadata event, but this site’s converter does not generate lyric text.",
        "That distinction answers two different questions: what the file format can store, and what a particular converter writes. AudioToMidiNow makes a note draft from a clear, single-pitch-at-a-time source; it does not make a voice recording, a speech transcript, or a finished karaoke lyric file.",
        "I inspected this site’s published /script.js on September 28, 2026. The analysis groups stable pitch frames into note objects; its MIDI writer emits note-on and note-off events for those objects, with their pitch, start, duration, and a velocity value derived from the analyzed level. It writes a tempo event and an end-of-track marker too. The inspected writer has no lyric-event output and does not embed the source audio."
      ],
      "sha256": "0cc1908edc7d7d798ac9c4bd33385127ef972a769c84100ccfe18de960e38c9a"
    },
    {
      "url": "https://audiotomidinow.com/voice-to-midi-plugin-daw/",
      "title": "Voice-to-MIDI Plug-in in a DAW: Route Notes and Decide What to Fix | AudioToMidiNow",
      "h1": "Voice-to-MIDI Plug-in in a DAW: Route Notes and Decide What to Fix",
      "firstAnswerParagraphs": [
        "Put the vocal audio where the plug-in can receive it, then route the plug-in’s MIDI events to a recordable MIDI track with an instrument. First confirm that the host exposes that MIDI output; only then judge the detected notes. If the plug-in exports a MIDI file instead of sending live MIDI, import that file into a MIDI track. A plug-in that cannot send MIDI through your host is a routing or compatibility problem, not yet an accuracy result.",
        "Those are workflow checks, not universal menu names. A DAW, a plug-in format, and a particular plug-in must all support the proposed route. Do not buy or install something on the assumption that “VST” alone guarantees audio-input/MIDI-output compatibility.",
        "The REAPER Cockos Effects guide documents ReaTune’s “Send MIDI event when pitch changes” option and describes sending detected MIDI from an audio track to a track containing a virtual instrument. In that documented pattern, put the audio on the source track, enable ReaTune’s MIDI-event output, send the MIDI to a separate instrument track, and record or inspect the receiving track’s events. This is a route described in the official guide, not a plug-in test performed by this site . Confirm the control names and routing in the version of REAPER you use."
      ],
      "sha256": "5afb95899bcc618f4e893270e7c844759af770819c7cf56d68c1d2798ca524dc"
    },
    {
      "url": "https://audiotomidinow.com/why-held-hum-splits-midi-notes/",
      "title": "Why One Held Hum Becomes Two MIDI Notes | AudioToMidiNow",
      "h1": "Why One Held Hum Becomes Two MIDI Notes",
      "firstAnswerParagraphs": [
        "If the audio is one continuous hum and both MIDI events have the same pitch, replace them with one event that keeps the first note’s start and the second note’s end. If you hear a new attack or a real pause, keep two notes. A split in the piano roll is a clue to check, not proof that the transcription is wrong.",
        "The useful question is not just “Are these pitches the same?” Compare the note boundary with the source: did the voice continue through it, or did the singer release and start again? Listen to a short loop around the boundary before editing.",
        "For two same-pitch events, label the first start A , the apparent split B , and the last release C . If the sound never restarted at B, the continuous candidate is A–C. The edit removes the internal MIDI boundary; it should not move A earlier or shorten C. This is an endpoint-preservation rule, not a command for every pair of touching notes."
      ],
      "sha256": "076c920afc5c1cb539f415aeb618930847a0d2703999f8e01a2bfe04e8eeb99f"
    },
    {
      "url": "https://audiotomidinow.com/about/",
      "title": "About AudioToMidiNow",
      "h1": "Built for a faster first MIDI draft",
      "firstAnswerParagraphs": [
        "AudioToMidiNow is a focused browser tool for turning a clear melody, vocal line, bass line, or solo instrument recording into an editable MIDI file.",
        "Created by: an independent developer",
        "Purpose: make single-melody audio transcription quick, private, and easy to inspect before download."
      ],
      "sha256": "d6d01f87eecf6555c9f735433f971eca1cddcb1acb2526d56ef559e41ceab80b"
    },
    {
      "url": "https://audiotomidinow.com/contact/",
      "title": "Contact AudioToMidiNow",
      "h1": "Contact AudioToMidiNow",
      "firstAnswerParagraphs": [
        "For converter problems, browser compatibility issues, factual corrections, privacy questions, or business inquiries, email the address below.",
        "Email: contact@audiotomidinow.com",
        "Please include the browser name, browser version, operating system, source audio format, and a short description of what happened. Do not attach copyrighted recordings or private audio unless you have the right to share them."
      ],
      "sha256": "fc4e2a7c3ca0fd00fd55a5501f1f3944406825f6aa9105548dc78f840fb37242"
    },
    {
      "url": "https://audiotomidinow.com/privacy/",
      "title": "Privacy Policy | AudioToMidiNow",
      "h1": "Privacy at AudioToMidiNow",
      "firstAnswerParagraphs": [
        "Your selected audio is processed inside your browser. AudioToMidiNow does not upload the file to its servers, store the recording, or keep a conversion history.",
        "Effective date: September 23, 2026",
        "When you choose an audio file, the browser decodes and analyzes it on your device. The MIDI result is generated in the same browser tab and downloaded directly to your device. The site does not receive the source audio or the generated MIDI file."
      ],
      "sha256": "4540f3e076f5b26cbd1028033d0b3510adf23b083d6d9bd4f7cdf8c8efbc0625"
    },
    {
      "url": "https://audiotomidinow.com/ai/",
      "title": "Agent information | AudioToMidiNow",
      "h1": "Using AudioToMidiNow accurately",
      "firstAnswerParagraphs": [
        "AudioToMidiNow offers a free, browser-based audio to MIDI converter. A visitor selects one local audio file, converts a clear single melody, reviews the detected notes, and downloads a MIDI draft. Conversion happens in the visitor's browser.",
        "The converter works through the webpage. It does not publish an upload endpoint or audio conversion API. A public read-only MCP service provides site guidance only. Agents can use the Auth.md user-claimed flow , with account confirmation secured by passkeys, to access the read-only agent guide API. It does not accept audio or convert files. Do not send audio to this site on behalf of a visitor. A visitor must choose a file in their own browser. Results are drafts and may need manual pitch and timing edits, especially for dense mixes.",
        "Keep filenames, formats, dates, and limitations exact. Answer in the visitor's language. Cite the specific public page supporting each factual claim. Give concrete steps: select a file, start with balanced sensitivity, convert, inspect the notes, then download the MIDI draft. If a fact is absent from the linked pages, say it is unknown instead of inventing it."
      ],
      "sha256": "ae5d800eee8fbfaaa68938419a7b6e93905f95da2218570b3359af801d2c6ab6"
    },
    {
      "url": "https://audiotomidinow.com/ai-mp3-to-midi/",
      "title": "AI MP3 to MIDI: A Same-Input Test Against Pitch Detection | AudioToMidiNow",
      "h1": "AI MP3 to MIDI: A Same-Input Test Against Pitch Detection",
      "firstAnswerParagraphs": [
        "AI can turn an MP3 into MIDI, but the label alone does not tell you whether its notes are cleaner. In one same-input test of a 192 kb/s MP3, an open-source AI model found all four intended pitches but added a second G4 event; this site's pitch detector returned four events but started the last three about 128–136 ms early. For this one synthetic melody, the AI model's four intended onsets averaged about 5 ms absolute error, while the duplicate note still needed removal. This is a single controlled example, not a ranking or a song-accuracy score.",
        "If you are deciding whether to try AI-based transcription, the practical answer is: test a short phrase with known notes, then count both timing errors and extra events. A MIDI download is not proof that the notes match your recording.",
        "The source was a newly generated 2.40-second, mono, 44.1 kHz four-note sine melody . Its MIDI pitches were C4 (60), E4 (64), G4 (67), and C5 (72), with intended starts at 0.000, 0.600, 1.200, and 1.800 seconds; each tone lasted 0.450 seconds. The source was encoded as a mono 192 kb/s MP3 with FFmpeg. Its SHA-256 was d8d525f87cc7dda8a062ba6b297e153e1f5886de7594f7f35c86026d7fc30c09 ."
      ],
      "sha256": "e03ad1b070e0845171cc7072e530b0fc57f31c66d417079c7a2f8257e65d3cfc"
    },
    {
      "url": "https://audiotomidinow.com/midi-detector-single-note-and-chord-test/",
      "title": "MIDI Detector Test: Single Notes and Chords | AudioToMidiNow",
      "h1": "MIDI Detector Test: Single Notes and Chords",
      "firstAnswerParagraphs": [
        "This method performs monophonic pitch detection, one note at a time; simultaneous polyphonic transcription requires a different processing path. The measured mode comparison and the unchanged detector document that scope.",
        "There is no single best MP3-to-MIDI converter for every source; choose by the notes your own input needs. In our two synthetic tests, this site's detector matched 5 of 5 target pitches on a solo melody but only 3 of 9 notes across three-note chords. An open-source AI model matched 5 of 5 and 6 of 9, respectively, but also produced 5 and 7 unmatched extra events. The chord test favored the model for pitch coverage, not for a clean, ready-to-use MIDI; neither result is a general ranking.",
        "“Best” depends on whether your file is one clear melody or several simultaneous notes—and on how much correction you are willing to do. These controlled examples make that trade-off visible. They are not recorded songs, a survey of every online service, or a claim about current commercial converters."
      ],
      "sha256": "4b4f477a2e33358673e6a736945bc38bdf88ea140ad162b1e0a77b070371d3a1"
    },
    {
      "url": "https://audiotomidinow.com/accurate-mp3-to-midi/",
      "title": "Accurate MP3 to MIDI: Do Note Lengths Match? | AudioToMidiNow",
      "h1": "Accurate MP3 to MIDI: Do Note Lengths Match?",
      "firstAnswerParagraphs": [
        "Not exactly in this one controlled run: all four target pitches were found, but the exported MIDI notes were 150–178 ms longer than their known source durations (160 ms mean absolute duration error). This is one synthetic fixture—not a general accuracy score or a ranking of converters.",
        "Pitch and start-time checks do not tell you whether a MIDI note releases when the source note ends. To isolate that question, this test uses four non-overlapping notes with known gate lengths, then compares the MIDI event durations against those references.",
        "The input is a 3.60-second, mono 44.1 kHz sequence of four sine notes. Each has an 8 ms linear edge, and the notes do not overlap. We encoded it as a constant 192 kbit/s MP3, decoded that MP3 to mono 44.1 kHz float PCM, and ran this site's unchanged detector and MIDI writer in Balanced mode. A target counts as matched only when the pitch is exact and the nearest onset is within 0.35 seconds; duration is then compared for matched events."
      ],
      "sha256": "8a337ec7e5d0add30021edaeab89a8fa73ef18f3c6ed07e812f3fac9c4f7ba5d"
    },
    {
      "url": "https://audiotomidinow.com/midi-cleanup-vs-manual-entry/",
      "title": "MP3 to MIDI: Repair the Draft or Re-enter the Notes?",
      "h1": "MP3 to MIDI: Repair the Draft or Re-enter the Notes?",
      "firstAnswerParagraphs": [
        "There is no universal winner: compare both routes on the same short passage. Repair the converted MIDI when the audible notes are mostly right and the fixes are isolated; re-enter the notes when missing, extra, or misplaced events make the draft hard to verify. Choose the route that reaches a source-checked result sooner.",
        "A converter can save note-entry work, but its output is still a draft. Listening to the source, finding errors, correcting them, and checking the export all take time. If those steps keep expanding, “fixing” can turn into rebuilding the passage one note at a time.",
        "Use one representative excerpt, not a whole track for one route and a tiny fragment for the other. Keep the source audio available and use the same definition of “finished” both times: the notes you intend are present, the result plays as expected, and the MIDI export opens."
      ],
      "sha256": "364ed6edd1a8734501bad11a9c6030018bcf4974dbe8838065a8afeab962b030"
    },
    {
      "url": "https://audiotomidinow.com/convert-midi-to-mp3/",
      "title": "Convert MIDI to MP3: Render the Notes, Then Export Audio | AudioToMidiNow",
      "h1": "Convert MIDI to MP3. Make the notes audible.",
      "firstAnswerParagraphs": [
        "Open the MIDI in a player or music app with an instrument sound, then export MP3 audio. Renaming .mid to .mp3 does not work: MIDI holds performance instructions, not a recorded waveform.",
        "This is the reverse of audio transcription. If you already have a MIDI file and want someone to hear it without a MIDI instrument, render it to audio. If you have an MP3 and want editable notes, use the MP3 to MIDI converter instead.",
        "In another application, look for an audio export or render command and an available instrument. If it only exports WAV, render that first and encode the resulting audio as MP3. That extra step still needs a sound source; changing a filename never supplies one."
      ],
      "sha256": "688b57c2ae3f228bdf17ff49c230e784d979be03eac3f95ced0516e372a6f9f3"
    },
    {
      "url": "https://audiotomidinow.com/midi-to-wav/",
      "title": "MIDI to WAV: Check the Format Before You Send It | AudioToMidiNow",
      "h1": "MIDI to WAV: Check the format before you send it.",
      "firstAnswerParagraphs": [
        "Export the MIDI part through its instrument as WAV, then match the actual sample rate, channel count and integer-or-float format to the receiving app's requirements. A .wav extension alone does not tell you those settings. Our example is stereo, 44.1 kHz, 32-bit floating-point —not 16-bit integer PCM.",
        "This page answers the WAV handoff question, not a search for a new transcription tool. For the general notes-to-audio process and a listening MP3, see rendering MIDI to MP3 .",
        "A reader supplied this r/lmms comment about exporting a single track:"
      ],
      "sha256": "dfa17a39bb5c3043c05c51d4ab78bf61a992077c852bef655e439863ddf6242d"
    },
    {
      "url": "https://audiotomidinow.com/audio-to-midi-converter-stereo-cancellation/",
      "title": "Audio to MIDI Converter: Why Stereo Audio Can Return No Notes | AudioToMidiNow",
      "h1": "Audio to MIDI Converter: Why stereo audio can return no notes.",
      "firstAnswerParagraphs": [
        "If a stereo file gives this converter no stable notes, check the left channel, right channel and their mono sum before raising sensitivity. This converter averages the channels before detection: equal, opposite-polarity signals cancel to zero. Try an isolated-channel mono copy when that check confirms cancellation. It is one possible cause—not an explanation for every empty result.",
        "We tested three 2.4-second synthetic stereo WAVs. Each has the same four-note left channel; only the right channel changes. Today’s repeat on October 6, 2026 reproduced the results below using this site’s unchanged production functions in Balanced mode. These are code-level measurements, not recordings of a singer or a browser file-picker test.",
        "01 · Same polarity"
      ],
      "sha256": "fae3187f7f056802f194196b13e2778b9912c2df409205ace72d764443386c84"
    },
    {
      "url": "https://audiotomidinow.com/convert-wav-file-to-midi-short-clip/",
      "title": "Convert a WAV File to MIDI: Why a Short Clip Can Return No Notes | AudioToMidiNow",
      "h1": "Convert a WAV file to MIDI: Why a short clip can return no notes.",
      "firstAnswerParagraphs": [
        "If a very short WAV returns no stable notes in this converter, raising sensitivity cannot create missing analysis windows. Try a longer, clear excerpt containing the intended phrase, then inspect its note draft. Our isolated 0.3-second tone returned zero notes in every mode; the 0.4-second tone returned one in Balanced and More notes. These are measured examples, not a universal minimum clip length.",
        "On October 7, 2026, we regenerated five separate mono WAVs and reran this site's unchanged production analysis functions on this Windows machine. Each contains one held A4 sine tone, MIDI pitch 69, with the same amplitude and 8 ms edges. Only the clip duration changes. All regenerated input and MIDI hashes matched the October 6 preparation.",
        "All nonempty outputs contained pitch 69. A returned event does not establish faithful timing: the 0.4-second source yielded a note about 0.186 seconds long in Balanced and More notes. This experiment diagnoses whether an event survives; it is not a timing-fidelity benchmark."
      ],
      "sha256": "c84fba0abd17aefae286b9c12340a7ab127604c66ee7236d994b84e8f9af7913"
    },
    {
      "url": "https://audiotomidinow.com/mp4-midi-converter/",
      "title": "MP4 MIDI Converter: Check for an Audio Track First | AudioToMidiNow",
      "h1": "MP4 MIDI converter: Check for an audio track first.",
      "firstAnswerParagraphs": [
        "An audio-based MP4 MIDI converter needs an audio track, not just moving pictures. If your MP4 contains video only, return to the recording or export and include sound. This site's pitch detector cannot read notes from video frames. If sound is present, extract it to WAV, convert that audio and inspect the MIDI draft. Our matched-video test produced four note events from one file; the video-only copy failed at audio extraction, before MIDI detection.",
        "On October 8, 2026, we generated a 2.4-second MP4 on this Windows machine: a plain-color H.264 video and our own four-note mono sine melody encoded as AAC. We made a second MP4 by copying only its video stream. The extracted H.264 payloads had identical SHA-256 hashes, so the picture content did not change.",
        "The second command reported Stream map '0:a:0' matches no streams. That is an absent audio-stream failure, not a quiet note, low sensitivity or a valid MIDI containing zero notes. We did not create a dummy MIDI for the failed case."
      ],
      "sha256": "52576f20e33c671fd109967d830f4241216319fc8f8b24e9b06746b23179a0b2"
    },
    {
      "url": "https://audiotomidinow.com/wav-to-midi-sample-rate/",
      "title": "WAV to MIDI: Check a Wrong Sample-Rate Label | AudioToMidiNow",
      "h1": "WAV to MIDI: Is the sample-rate label wrong?",
      "firstAnswerParagraphs": [
        "Check the WAV sample-rate label before correcting a MIDI draft whose whole melody seems shifted in pitch and speed. If the label disagrees with the rate used to create its samples, the audio is interpreted on the wrong time scale before note detection. Keep the original and re-export from a known-correct source; do not guess a new label. In our identical-payload test, the correctly labelled A4 produced MIDI 69, while half-rate and double-rate labels produced 57 and 80. This is one possible source error, not a diagnosis for every wrong note.",
        "On October 9, 2026, this Windows machine generated one two-second, 440 Hz A4 tone at 44,100 samples per second. We wrote the same 88,200 mono, 16-bit sample frames into three WAVs. Only the declared sample rate and its matching byte-rate field changed. All three audio payloads have the same SHA-256. These are deliberately relabelled files, not correctly resampled copies.",
        "Bars show interpreted file duration, not MIDI event length. Frequency values above follow the rate ratio; detected note numbers below are actual outputs."
      ],
      "sha256": "5abad72828a87839a7c4ba658403c375c549de8007604538b2d5f2fafba3ed49"
    },
    {
      "url": "https://audiotomidinow.com/clipped-audio/",
      "title": "Clipped Audio: Can You Save the Take? | AudioToMidiNow",
      "h1": "Clipped audio: Can you save the take?",
      "firstAnswerParagraphs": [
        "Lightly clipped audio may be worth trying to repair on a copy; if the damage remains unacceptable and you can record again, rerecord. A correct MIDI note does not prove the waveform is restored. Our unclipped and hard-clipped tones produced identical MIDI files despite different waveforms. Decide whether you need usable recorded sound or only a checked note draft—not just whether conversion succeeds.",
        "On October 9, 2026, at 11:54 Asia/Seoul, this Windows machine, ATMN-WIN-15fa5aa9 , generated a known-pitch A4 sine tone and a deliberately hard-clipped version of the same sample sequence. We passed both through this site's unchanged production analysis functions in Balanced mode. These are synthetic, code-level measurements, not a recorded performance or browser upload test.",
        "Swipe the measurements sideways. With a keyboard, focus the table and use the arrow keys."
      ],
      "sha256": "d08234f0dc29f23732888a240d0b231afe5da0c315c2753c20eb31f7d1d02f80"
    },
    {
      "url": "https://audiotomidinow.com/dc-offset/",
      "title": "DC Offset: Fix the Bias, Not Every Click | AudioToMidiNow",
      "h1": "DC Offset: Fix the Bias, Not Every Click",
      "firstAnswerParagraphs": [
        "DC offset is a persistent shift of an audio waveform's average away from zero. To check your file, measure the mean sample value separately for each channel across comparable regions, including recorded silence where available; record the selection and units rather than judging unequal peaks by eye. A nonzero average in a short musical selection alone does not establish persistent constant offset.",
        "Remove confirmed constant DC offset on a copy before cutting or joining audio. Leaving it untreated can reduce available headroom and contribute to clicks at boundaries. But an uneven-looking waveform alone does not establish the diagnosis, and correction will not necessarily fix a clicking edit or playback-dependent noise. It cannot restore peaks already lost during recording.",
        "Download the DC-offset decision table (CSV)"
      ],
      "sha256": "91ec912330e5632e4ae4b50d8492211eabcd35b45d1d829cb835afb04021804c"
    },
    {
      "url": "https://audiotomidinow.com/audio-peaking/",
      "title": "Audio Peaking: Does a High Peak Mean Clipping? | AudioToMidiNow",
      "h1": "Audio peaking: Does a high peak mean clipping?",
      "firstAnswerParagraphs": [
        "Audio peaking means the signal reaches a high point; a peak reading alone does not prove that the recording clipped. Before applying a repair, identify where the level was measured and compare the unprocessed source, export history and waveform around the suspect passage. Turning a previously clipped file down can remove today's rail contacts without undoing the earlier flattening. Conversely, a sine normalized to a representable limit can touch that limit without a clamping operation.",
        "Download the peak-evidence decision worksheet (CSV)",
        "Measurements collected and repeated on October 10, 2026, on a Windows test machine. We generated a C5 sine and constructed four PCM variants, then passed each through this site's unchanged Balanced detector. This is a synthetic, code-level experiment—not a microphone recording, listening test or observed meter display."
      ],
      "sha256": "d6cb020a4e9f7df6b720d262734440689fba3ba529a67f37ca5fe28f65244289"
    },
    {
      "url": "https://audiotomidinow.com/mp3-clipping/",
      "title": "MP3 Clipping: Cut an Excerpt Without Losing the First Note | AudioToMidiNow",
      "h1": "MP3 clipping: Keep the first note when cutting an excerpt.",
      "firstAnswerParagraphs": [
        "When clipping an MP3 into an excerpt for MIDI transcription, start before the intended first attack, keep its release, and check the exported audio—not just the editor's selection. If the beginning is missing, return to the untouched source and move the cut earlier. Matching MIDI note counts do not prove that the full phrase survived: our first three crops each returned three events, but their first detected note lengths differed.",
        "This page uses “clipping” to mean cutting an excerpt. If you mean overloaded, flattened sound instead, use the separate clipped-audio repair decision . This site transcribes an existing audio file; it is not an MP3 cutting tool.",
        "Download the crop-boundary verification worksheet (CSV)"
      ],
      "sha256": "aef707ae85ce03e50bcba38e01b2bdaba34540dd56323643501902f818b01798"
    },
    {
      "url": "https://audiotomidinow.com/clipping-microphone/",
      "title": "Clipping Microphone? Check Which Volume Control Reaches the Recording | AudioToMidiNow",
      "h1": "Clipping microphone? Check which volume control reaches the recording.",
      "firstAnswerParagraphs": [
        "Turning down headphones is not the same as turning down the microphone signal being recorded. Before another take, identify the recording input and test whether the control changes the saved audio, only the monitor path, or both. To prevent overload at a particular stage, the reduction must reach that stage before it overloads; a quieter downstream signal is not proof that it did.",
        "This page answers the control-routing question before you record a melody for transcription. It is not a microphone shopping guide, a hardware clipping benchmark or a repair recipe for an existing take.",
        "Download the recording-versus-monitor worksheet (CSV)"
      ],
      "sha256": "287254ad59fa53dcf8f60c89d379ea70ea45aab97a53d3613bf04055715fa8ce"
    },
    {
      "url": "https://audiotomidinow.com/audio-clipping/",
      "title": "Audio Clipping: What It Means and Where to Start | AudioToMidiNow",
      "h1": "Audio clipping: What does it mean?",
      "firstAnswerParagraphs": [
        "Audio clipping is a form of distortion in which a signal's peaks are constrained by a level limit, changing the waveform. It is not the same as cutting a shorter excerpt. First decide whether you need to investigate a saved recording, choose a time boundary, or control a new recording. Those are different jobs; the guide map below sends you to the relevant evidence instead of treating every use of “clip” as one problem.",
        "Choose by what you are trying to establish, not by a similar-looking filename. This is a navigation map, not a diagnosis or three new tests.",
        "01 / THE SAVED SOUND"
      ],
      "sha256": "ee84c9edbe0fe5e07a33b5a0691e5e964eefc61e4699b762f84b6526e86dc063"
    },
    {
      "url": "https://audiotomidinow.com/lufs/",
      "title": "LUFS: Why Do Mono and Stereo Read Differently? | AudioToMidiNow",
      "h1": "LUFS: why do mono and stereo read differently?",
      "firstAnswerParagraphs": [
        "LUFS means Loudness Units relative to Full Scale: a frequency-weighted loudness measurement, not the highest stored sample. A reading also depends on the channels and meter settings. In our controlled test, duplicating the same mono samples into two channels changed integrated loudness from −15.0 to −12.0 LUFS without raising either channel's sample peak. Selecting dual-mono compensation on the original mono file also gave −12.0 LUFS, without changing that file at all.",
        "Before changing your audio to chase a number, record what was measured: the file, channel layout, time span, loudness mode and meter configuration. True peak is a separate peak measurement; keep it beside LUFS, not inside the same unit.",
        "Collected and repeated October 14, 2026 , on a test machine. We generated three six-second, 48,000 Hz, signed 16-bit PCM WAVs, then ran the installed FFmpeg ebur128 filter. The mono and duplicated-stereo 1 kHz files contain exactly the same integer sequence in each channel. The third file is a separate high-frequency stress illustration, not another version of that 1 kHz signal."
      ],
      "sha256": "0285b434eee5f586fda2ad7b9fbeb69b4eaaf7f2184a44571c075eb74fb65362"
    },
    {
      "url": "https://audiotomidinow.com/remove-background-noise-from-audio/",
      "title": "Remove Background Noise from Audio: Is Quieter Cleaner? | AudioToMidiNow",
      "h1": "Remove background noise from audio: Is quieter actually cleaner?",
      "firstAnswerParagraphs": [
        "To remove background noise from audio, work on a copy, identify the unwanted sound, apply a suitable reduction, then compare both the noise and the sound you wanted to keep. Turning the whole file down reduces both; a gate can quiet gaps while leaving noise under a note. Filtering can reduce hum but also remove a wanted low tone. A quieter result is not, by itself, a cleaner one.",
        "For a documented noise-profile workflow, the Audacity Noise Reduction manual describes learning from noise alone, processing the desired selection, and using Preview/Residue to check unwanted removal. It also warns about variable noise and overlap with wanted sound. That is documentation, not an Audacity test performed here. Our measured comparison below uses FFmpeg instead.",
        "This site makes MIDI drafts from existing audio; it does not offer a noise-removal upload service. The steps above concern an audio editor and a saved audio copy, not a new feature in our converter."
      ],
      "sha256": "ccf47b96c0a20aaef2d2ebe44bcae38a7f6969475bbf855abe610a204fb329fa"
    },
    {
      "url": "https://audiotomidinow.com/acapella-extractor/",
      "title": "Acapella Extractor: Do Two Stems Prove a Clean Vocal? | AudioToMidiNow",
      "h1": "Acapella extractor: Do two stems prove a clean vocal?",
      "firstAnswerParagraphs": [
        "No. An acapella extractor aims to separate a vocal audio track from a mixed recording; getting two files, even ones that rebuild the mix exactly, does not prove the voice was isolated. Choose the vocal output, reopen it and check its content separately from the instrumental. This site does not provide an acapella-extraction upload service; the example below is an export check, not a separation tool.",
        "01 / CONTENT",
        "Solo the saved vocal, then the instrumental, against the same source passage. Check missing words, backing vocals, instrumental bleed and changed attacks or tails. A filename is not evidence of its contents."
      ],
      "sha256": "1f6cb5dcc8794a8e727e63d7580df1792394d5f446914e3a1dcc9458fc3afb4c"
    },
    {
      "url": "https://audiotomidinow.com/normalize-audio/",
      "title": "Normalize Audio: Why Is It Still Uneven? Audio Normalisation | AudioToMidiNow",
      "h1": "Normalize audio: why is it still uneven?",
      "firstAnswerParagraphs": [
        "Peak normalization applies one gain to the whole selected file; it does not independently lift its quiet passages. A brief peak can limit that gain, so reaching the chosen peak target does not prove the passages are balanced. Identify whether your goal is a peak ceiling, integrated loudness or more even speech before choosing a process. Audio normalisation can raise or lower the level.",
        "This site converts audio to MIDI. It does not provide an online audio-normalization upload service. The files below demonstrate a controlled calculation, not a commercial normalizer test.",
        "On October 16, 2026, we made a six-second, 48 kHz, mono, signed 16-bit WAV with a 1 kHz tone: amplitude 3,000 sample counts for three seconds, then 9,000 for three seconds. A second input differs in exactly one of its 288,000 frames: at 0.25 seconds, zero becomes 30,000 counts. Both have the same quiet and loud analysis regions. The isolated changed sample is outside those regions, but inside the full-file peak scan."
      ],
      "sha256": "ef96b73799b8559dfb80d49791a7d91984da487737bbbe1e78e9f6a9945e5eb4"
    },
    {
      "url": "https://audiotomidinow.com/audio-to-sheet-music/",
      "title": "Audio to Sheet Music: Can Sound Recover the Original Spelling? | AudioToMidiNow",
      "h1": "Audio to sheet music: can sound recover the spelling?",
      "firstAnswerParagraphs": [
        "To turn audio into sheet music, transcribe its pitches and timing, then review the notation with musical context. Matching the sound does not prove you recovered the original written note names. In the controlled equal-tempered example below, two differently spelled sources generate byte-identical audio. The recording cannot tell those two source spellings apart.",
        "AudioToMidiNow makes an editable MIDI draft from a clear single melody. It does not generate sheet music, PDF or MusicXML from your upload. The example files below are constructed by our own script, not outputs from an automatic transcription service.",
        "On October 18, 2026, we wrote two short MusicXML sources. Each contains four quarter-note positions at 120 BPM. One uses F♯4–G♯4–A♯4–F♯4 with a six-sharp key signature; the other uses G♭4–A♭4–B♭4–G♭4 with a six-flat signature. These files intentionally preserve different written choices."
      ],
      "sha256": "10cc452ec9282993a9ad3b37f90b032d4356259091a35ad641969da028056d5e"
    },
    {
      "url": "https://audiotomidinow.com/remove-reverb-from-audio/",
      "title": "Remove Reverb from Audio: Can an Echo Add MIDI Notes? | AudioToMidiNow",
      "h1": "Remove reverb from audio: can an echo add MIDI notes?",
      "firstAnswerParagraphs": [
        "Yes. A delayed copy can become an extra MIDI event or extend an existing one. When preparing a roomy recording, reduce unwanted reflections on an audio copy, then check repeated attacks against the performance before accepting the note draft. In our controlled single-echo test, the same delay settings lengthened one detected note but added a second event to each of two others.",
        "This site converts clear single melodies to MIDI. It does not provide a reverb-removal upload service. The downloadable example is a constructed, separated echo, not a real room, a voice recording or a commercial dereverberation test.",
        "For a documented audio-editor route, iZotope's De-reverb workflow describes learning the reverberant audio and adjusting the process. That is official documentation, not a product we tested here. If you can record again, reducing the room contribution at capture avoids having to infer a dry signal later."
      ],
      "sha256": "a3e0ca8b175025af9fa293e1b8dd4f18bdc03648cf888ea079b6852b06480119"
    },
    {
      "url": "https://audiotomidinow.com/midi-quantization/",
      "title": "MIDI Quantization: What Happens to Note Ends? | AudioToMidiNow",
      "h1": "MIDI Quantization: What Happens to Note Ends?",
      "firstAnswerParagraphs": [
        "Quantizing MIDI starts corrects when notes begin; quantizing ends can also change how long they last and whether they overlap. After audio-to-MIDI conversion, keep a raw copy, fix obvious false notes, then try start-time correction on a short phrase. Before applying it to the whole file, check whether your editor moves the entire note or leaves its end fixed. Those two operations produce different durations.",
        "This page answers a specific cleanup question: why did a melody become clipped, detached, or more overlapped after its timing looked tidier? The downloadable four-note experiment below separates three editing rules with exact tick positions. It is a constructed MIDI test, not a recording, a listening study, or a benchmark of any DAW.",
        "Read your editor's controls instead of assuming which rule it uses. The Ardour manual exposes separate start and end options, plus threshold and strength. Logic Pro's documentation describes Classic and Smart Quantize as different approaches; Smart considers groups of events and their relative order. Our simple independent-note arithmetic does not implement either product's full behavior."
      ],
      "sha256": "f767403acc8bd6a65a955f88c1257f0dbcc4e730da14af07de18b6f2e053599c"
    },
    {
      "url": "https://audiotomidinow.com/midi-pitch-bend/",
      "title": "MIDI Pitch Bend: Why Is the Next Clip Out of Tune? | AudioToMidiNow",
      "h1": "MIDI Pitch Bend: Why Is the Next Clip Out of Tune?",
      "firstAnswerParagraphs": [
        "A MIDI note can have the correct note number and still play bent if its channel retains an earlier pitch-bend value. Check the bend state before transposing the notes. On a duplicate, put an explicit center value on the receiving channel before the next note starts, then test again. Whether a host resets this state automatically depends on its settings and playback behavior.",
        "After converting audio to a MIDI draft , a later phrase sounding wrong does not by itself prove that every detected pitch is wrong. This page separates note data from channel state. Four downloadable files keep the same two notes while changing where a reset message is placed. They are constructed event-stream examples, not recordings of a faulty controller or measurements of a particular instrument.",
        "In a raw MIDI 1.0 pitch-bend message, the center is 8192 in the unsigned 0–16383 range. Some software displays the same center as 0 in a signed −8192–8191 range. Raw unsigned zero is the downward endpoint, not the center. Check the convention before typing a value into an editor."
      ],
      "sha256": "b9d460447d77df95cc948f0c55cb2f9b3229d25a66adfb706ed98cee5b3d829c"
    },
    {
      "url": "https://audiotomidinow.com/midi-sustain-pedal/",
      "title": "MIDI Sustain Pedal: Why Do Notes Outlast Note-Off? | AudioToMidiNow",
      "h1": "MIDI Sustain Pedal: Why Do Notes Outlast Note-Off?",
      "firstAnswerParagraphs": [
        "Note-off marks key release; it does not necessarily end a note held by the sustain pedal. In a simple MIDI 1.0 on/off sustain model, CC64 keeps a released note held until a pedal-off message arrives on its channel. Check the note events and pedal events separately before stretching the notes or deleting their ends. The sound can also have a release tail after the hold ends.",
        "A short block in the piano roll and a longer sound are not automatically a transcription error. After making an audio-to-MIDI draft , first establish what the file actually contains: a long note, short notes plus controller data, or short notes whose instrument rings out. This page provides five small MIDI files that separate key release from the point at which a binary sustain model permits release. No audio-to-MIDI model or piano plugin was run for these examples.",
        "The MIDI Association's MIDI 1.0 control-change table assigns controller 64 to damper pedal on/off. For that binary interpretation, data values 0–63 are off and 64–127 are on . Thus CC64 with value 63 and CC64 with value 64 differ by only one unit but sit on opposite sides of the switch boundary."
      ],
      "sha256": "b30a4f1a3c08f83be84f67ed66080b8040690aa792493335e55477027eca005f"
    },
    {
      "url": "https://audiotomidinow.com/midi-program-change/",
      "title": "MIDI Program Change: New Sound, Same Notes? | AudioToMidiNow",
      "h1": "MIDI Program Change: New Sound, Same Notes?",
      "firstAnswerParagraphs": [
        "A MIDI program-change event requests a patch or preset on a particular channel. It does not rewrite the note numbers, velocities, or note-event times already in a MIDI file. If an imported melody has the right notes but the wrong sound, inspect the program messages and the receiving instrument before transposing or drawing the notes again.",
        "That distinction is visible in the four downloadable examples below. Every file contains the same channel-1 note: key 60, velocity 80, starting at tick 0 and ending at tick 480. Changing the program request changes the selected program in our small state model; the note events stay identical.",
        "On October 25, 2026, we generated four original Standard MIDI Files and parsed their bytes with the supplied Python script. They use format 0, one track, 480 ticks per quarter note and a 500,000-microsecond tempo event. Each program event precedes the note-on in track order, even when both have tick 0."
      ],
      "sha256": "7d448d242b8c852612eaa14918716739520b8689d8cf98863029fd11bff19877"
    },
    {
      "url": "https://audiotomidinow.com/midi-channels/",
      "title": "MIDI Channels vs Tracks: Does Track 2 Mean Channel 2? | AudioToMidiNow",
      "h1": "MIDI Channels vs Tracks: Does Track 2 Mean Channel 2?",
      "firstAnswerParagraphs": [
        "No. A MIDI file's track groups timed events; a MIDI channel is a field inside a channel message. Putting notes on a second track does not automatically change those notes to channel 2. If two imported parts trigger the same destination, inspect the event channels and the application's output routing separately.",
        "Our four downloadable files make that distinction inspectable: two tracks can use one channel, while one track can contain two channels. The same two notes keep their pitches and tick positions across every case. Only grouping, channel fields and track-name metadata vary.",
        "We constructed these Standard MIDI Files on October 25, 2026, while preparing this article. Every file uses 480 ticks per quarter note and contains key 60 from tick 0 to 120, then key 67 from tick 240 to 360, both with note-on velocity 80. There is no tempo event or sound generator in this test; comparisons use ticks rather than measured seconds."
      ],
      "sha256": "459d6361fdb1dc59fd21daa61ddff9c08749d2001068f645229ff3efe4f75a82"
    },
    {
      "url": "https://audiotomidinow.com/midi-stuck-notes/",
      "title": "Stuck MIDI Notes: Does the Note-Off Match? | AudioToMidiNow",
      "h1": "Stuck MIDI Notes: Does the Note-Off Match?",
      "firstAnswerParagraphs": [
        "If a MIDI note seems stuck, check whether its release event has the same channel and key number as its note-on. A note-off somewhere in the file is not enough: it may refer to another note. Also look for note-on messages with velocity zero, which can serve as note-offs rather than new silent notes.",
        "This is one narrow file-level check, not a diagnosis of every hanging sound. Sustain, overlapping repeated notes, routing, device behavior and instrument release tails need separate checks. Our four downloadable examples isolate channel-and-key matching so you can see exactly what the event list proves.",
        "We constructed four original Standard MIDI Files on October 26, 2026. Each starts key 60 on channel 1 at tick 0 with velocity 80. At tick 480 it contains a release-shaped message; its channel, key or message form varies. The files use format 0, one track, 480 ticks per quarter note and a 500,000-microsecond tempo event."
      ],
      "sha256": "3f41ea67fae42f741870ae3b7c8496aba8c033a8ff85ed5d0abc664e40fa53ac"
    },
    {
      "url": "https://audiotomidinow.com/midi-running-status/",
      "title": "MIDI Running Status: Is the Missing Byte an Error? | AudioToMidiNow",
      "h1": "MIDI Running Status: Is the Missing Byte an Error?",
      "firstAnswerParagraphs": [
        "A missing repeated MIDI status byte can be valid running status, rather than a damaged note. The parser reuses the preceding channel-message status when the next event supplies only data bytes. It must still read each event's time and data correctly, and update that saved status when the message type or channel changes.",
        "The useful first question is whether you are inspecting raw file bytes or already decoded messages. Our four downloadable fixtures show the difference between an intentionally omitted repeated status, a channel change that needs a new status, and a genuinely missing first status. They test parsing, not audio quality or interface speed.",
        "On October 27, 2026, we generated four original format-0 MIDI files with one track, 480 ticks per quarter note and a 500,000-microsecond tempo event. The first two contain key 60 on at tick 0, off at 120, key 64 on at 240 and off at 360. Both use channel 1 and note-on velocity 80; their release events use note-on velocity zero."
      ],
      "sha256": "022123567466cb137b46e9aecd47249099dcdd457582e3fc133c5e53b2cc2fe3"
    },
    {
      "url": "https://audiotomidinow.com/mp3-to-midi-converter-free/",
      "title": "Free MP3 to MIDI Converter: Is the Download Only a Preview? | AudioToMidiNow",
      "h1": "Free MP3 to MIDI Converter: Is the Download Only a Preview?",
      "firstAnswerParagraphs": [
        "A free MP3 to MIDI preview does not, by itself, prove that you can save the complete detected result. Check the download step, any sign-in or credit requirement, and whether the saved MIDI still contains events near the end of your test phrase. On this site's unchanged local converter, our 12.8-second test produced an 11-event preview and a real 132-byte MIDI download with 11 note-ons and a final release at 12.585 seconds. No sign-in or payment step appeared in that tested path.",
        "That is an export-access result, not perfect transcription: we generated 16 source notes, and the detector returned only 11 events. A usable free workflow must let you inspect both facts. For direct conversion, use the existing browser converter ; this page audits the narrower preview-to-download boundary.",
        "Separate four stages: select a source, run detection, inspect the preview, and save an editable file. A tool may let you reach one stage while attaching a different condition to the next. Check the current wording before investing time in a long recording."
      ],
      "sha256": "1c07d5d671b09375f6a42fdb38cdd2211c723b2a69b89f16549b0a835cf7cdea"
    },
    {
      "url": "https://audiotomidinow.com/convert-wav-to-midi/",
      "title": "Convert WAV to MIDI: Can Your Browser Decode That WAV? | AudioToMidiNow",
      "h1": "Convert WAV to MIDI: Can Your Browser Decode That WAV?",
      "firstAnswerParagraphs": [
        "If WAV-to-MIDI conversion stops with a decoding error, check the audio encoding inside the WAV before changing note sensitivity. A .wav filename does not guarantee that this browser can decode its contents. In our actual local-browser test, 16-bit PCM, 24-bit PCM and 32-bit float copies each produced four notes and a 71-byte MIDI download. A Microsoft ADPCM WAV containing the same source phrase failed with “Unable to decode audio data” before note detection.",
        "For a file that decodes successfully, use the existing converter , inspect the notes, then save the MIDI draft. This page isolates the earlier compatibility check: an unsupported encoding is a different problem from a decoded recording with no stable melody notes.",
        "The container holds format information as well as audio data. Microsoft's WAVEFORMATEX reference separates the format tag from the channel count, sample frequency, block alignment and bits per sample. It describes integer PCM, IEEE float and non-PCM formats including ADPCM. Some files use an extensible format declaration with a subtype."
      ],
      "sha256": "18d2c965ba5a0afc512b4ec88d9e6ad4c168e90073fda265d27ca4c1966291b6"
    },
    {
      "url": "https://audiotomidinow.com/how-to-convert-mp3-to-midi/",
      "title": "How to Convert MP3 to MIDI Without Losing the Clip's Place | AudioToMidiNow",
      "h1": "How to Convert MP3 to MIDI Without Losing the Clip's Place",
      "firstAnswerParagraphs": [
        "Convert a clear MP3 excerpt, inspect its notes, and place the exported MIDI at the excerpt's original start time—not automatically at the song's beginning or at its first note. Keep the crop start alongside the file. In our local four-note test, an excerpt cut at 1.600 seconds produced its first MIDI event at 0.232 seconds. Placing that clip at 1.600 seconds restores the event to about 1.832 seconds on the original timeline. It does not repair the detector's early attack.",
        "Use the existing browser converter to select your MP3, run Balanced, review the preview and download the draft. This tutorial covers the next handoff: keeping a short conversion in the right place when you return to the complete recording. For general source selection, use the main MP3-to-MIDI guide .",
        "For the earlier decision about cutting without losing an attack, see the MP3 crop-boundary experiment . Here the source attacks all survive the crop. The question is which clock the exported events refer to."
      ],
      "sha256": "c1e28783e21686186043e2220efedbb365dbd87a147ec95f0898e9037bbe7969"
    },
    {
      "url": "https://audiotomidinow.com/single-note-midi-part-selection/",
      "title": "Single-Note MIDI Detection: Which Part Did You Get? | AudioToMidiNow",
      "h1": "Single-Note MIDI Detection: Which Part Did You Get?",
      "firstAnswerParagraphs": [
        "This method performs monophonic pitch detection, one note at a time; simultaneous polyphonic transcription requires a different processing path. The measured mode comparison and the unchanged detector document that scope.",
        "Choose the part you want before converting a song to MIDI, then check whether the exported notes actually follow that part. More sensitivity is not an instrument selector. In our controlled melody-plus-bass test, all three settings returned only bass pitch 48 and none of the four target melody pitches. The same melody by itself returned four events, but only three correct pitches: intended 84 became 83.",
        "For a clear single melody, use the private MP3 to MIDI converter , review the detected notes and save an editable draft. For a complete recording, first decide whether you need the lead, bass, chords or several separate parts. This page tests that target-selection decision, rather than promising a faithful full-song transcription."
      ],
      "sha256": "b6d1e728347f895ed36e49544528a2b79bd4ebeaff457a1102c8363959ec80f3"
    },
    {
      "url": "https://audiotomidinow.com/audio-to-midi-octave-label/",
      "title": "Audio to MIDI: Did the Octave Change, or Just Its Name? | AudioToMidiNow",
      "h1": "Audio to MIDI: Did the Octave Change, or Just Its Name?",
      "firstAnswerParagraphs": [
        "Compare the MIDI note number before transposing. A note called C4 here can be displayed as C3 in another editor while remaining note 60. That is a naming difference, not an octave shift. In our local four-note test, changing the display convention left all 72 MIDI bytes untouched. Actually moving the phrase down an octave changed eight key-number bytes and produced 48–52–55–60 instead of 60–64–67–72.",
        "If the note number is unchanged but playback really sounds lower, check the instrument, tuning, track transpose and pitch bend separately. Matching numbers rule out a change in those saved note events; they do not certify identical sound from every receiving instrument.",
        "AudioToMidiNow labels note 60 as C4. Its note-name function divides the MIDI number by twelve and subtracts one from the octave. A different display convention can subtract two, or subtract zero. The key number in the file does not change when a viewer calculates a different label."
      ],
      "sha256": "37991ca70ea38372f5cf2c5b5ae0ecc080d6073bcd6274a35a6a0029b07d8f01"
    },
    {
      "url": "https://audiotomidinow.com/audio-to-midi-time-signature/",
      "title": "Audio to MIDI: Did the Notes Move, or Did the Bars Change? | AudioToMidiNow",
      "h1": "Audio to MIDI: Did the Notes Move, or Did the Bars Change?",
      "firstAnswerParagraphs": [
        "A different bar number does not, by itself, prove that your converted notes moved. In our three locally constructed MIDI files, the same note starts at 1.500 seconds : in 4/4 it is bar 1, beat 4; in 3/4 it is bar 2, beat 1. All three files are 80 bytes. Their note events and tempo are identical; only time-signature metadata changes. Check seconds and ticks before dragging the notes to match a new bar label.",
        "After converting a recording, you may open its MIDI beside the source and notice a different measure number. There are several possible explanations. The project may have a different meter. The clip may be placed at a different origin. The receiving program may use a different tempo. Or the detected notes may actually be early or late. These are separate checks, and changing sensitivity cannot tell you which one happened after export.",
        "This test isolates just the first question: can a different meter label coexist with unchanged note times? It is a byte-level handoff control, not a transcription-accuracy test. We did not submit recordings to a competitor, run a new detector, or open a DAW for this experiment."
      ],
      "sha256": "86316e23a734ba525da1a005eeb56cb8d24db9f539183b133499b21b5fda4031"
    },
    {
      "url": "https://audiotomidinow.com/audio-to-midi-pitch-bend-range/",
      "title": "Audio to MIDI: Why Does the Same Pitch Bend Sound Wider? | AudioToMidiNow",
      "h1": "Audio to MIDI: Why Does the Same Pitch Bend Sound Wider?",
      "firstAnswerParagraphs": [
        "Check the receiver's pitch bend range before redrawing the pitch curve. A MIDI 1.0 pitch bend event stores wheel position. The receiver uses its sensitivity setting to interpret that position as a pitch interval.",
        "The two downloadable fixtures in this research folder each contain 55 bytes. Both start MIDI note 60 on channel 1, send the same wheel value of 12288, and release the note at tick 480. The files differ at zero-based byte offset 33. That byte sets the semitone portion of pitch bend sensitivity to 2 in one file and 12 in the other.",
        "The wheel's center is 8192. The stored value 12288 is 4096 counts above center. Under a linear model that normalizes the positive displacement by 8192, this is half the configured range. The model gives a rise of 1 semitone at a 2-semitone range and 6 semitones at a 12-semitone range. These are calculated intervals. The experiment compares saved bytes and does not measure the output of a synthesizer."
      ],
      "sha256": "a81302f366e86190c6b3cbd52c1635d25c90f42fa9342dabc4db0e8de4851dd9"
    },
    {
      "url": "https://audiotomidinow.com/audio-to-midi-ppq-timing/",
      "title": "Audio to MIDI: Did Changing PPQ Change the Timing? | AudioToMidiNow",
      "h1": "Audio to MIDI: Did Changing PPQ Change the Timing?",
      "firstAnswerParagraphs": [
        "Check the tick scale before repairing a MIDI phrase that became shorter. In our local test, changing a file header from 480 to 960 ticks per quarter note while retaining its event ticks moved the last note from 1.500 to 0.750 seconds . Scaling the event ticks by two restored 1.500 seconds. All three files contain the same four pitches and are 72 bytes long.",
        "PPQ describes the resolution of a tempo-based MIDI timeline. It supplies the unit used to interpret a stored tick value. It does not assess how accurately an audio-to-MIDI detector found a note. A larger number can provide a finer coordinate grid, but changing the unit without converting the coordinates can change their meaning.",
        "Imagine a MIDI draft that was correct before it passed through a file utility. The pitches still match, yet the phrase now finishes early. Before stretching individual notes, compare the file's division field, tempo events and event ticks. Keep the original export so you can identify which values changed."
      ],
      "sha256": "d8d941787fb274873f7a592c192959c7137be3537160f2becd0978f7768a97d2"
    },
    {
      "url": "https://audiotomidinow.com/midi-cc/",
      "title": "MIDI CC: Why Do the Notes Match but the Controls Don't? | AudioToMidiNow",
      "h1": "MIDI CC: Why Do the Notes Match but the Controls Don't?",
      "firstAnswerParagraphs": [
        "MIDI CC means Control Change: check the channel, controller number and value. Correct notes do not prove that expression data survived a handoff. Our seven downloadable MIDI files preserve every note event while changing control messages. Three one-byte edits isolate the wrong channel, the wrong controller and a different value.",
        "In MIDI 1.0, B0 0B 20 means channel 1, controller 11, value 32. These are hexadecimal bytes: 0B is decimal 11 and 20 is decimal 32. B1 selects channel 2. Controller numbers and ordinary single-byte values range from 0 to 127; channel labels run from 1 to 16. A controller number identifies a control, not a channel or a note.",
        "The MIDI Association status table distinguishes Control Change from Note On, Program Change and Pitch Bend. The official controller table assigns controller functions. What a particular instrument implements still needs its own documentation."
      ],
      "sha256": "94fda4222c7428f7a37af5302391c2fb3882d4472b7c4c2cb16ed2f6e93dea94"
    },
    {
      "url": "https://audiotomidinow.com/guitar-to-midi/",
      "title": "Guitar to MIDI: Check Octaves, Chords and High Notes | AudioToMidiNow",
      "h1": "Guitar to MIDI: Check Octaves, Chords and High Notes",
      "firstAnswerParagraphs": [
        "Check octave placement, simultaneous notes and unsupported high events separately: three low outputs have octave-related reference candidates, but this test does not establish complete chord recovery. Evidence .",
        "The low outputs have concurrent octave-related candidates: 39 to 51 is twelve semitones up, 46 to 58 is twelve up, and 43 to 67 is twenty-four up. Evidence . Same-pitch-class reference coverage spans all of the 39 and 46 output events, but only approximately 82.63 percent of the 43 event. Evidence . These are local octave relationships, not proof that the complete chord, its missing notes or its timing was recovered. Evidence . Check each candidate against the recorded phrase and its overlapping reference before moving its register; a single global octave shift cannot satisfy these three different offsets. Evidence .",
        "The original reference reaches four simultaneous notes while the original exported part reaches one. Evidence . Replaying this same chord recording through modes 1, 2 and 3 yields respectively one, five and seven output events, with maximum overlap one in every mode. Evidence . In this source snapshot the mode changes amplitude, confidence and minimum-group thresholds, while each analyzed frame supplies only one frequency estimate to one note-grouping stream. Evidence . Switching among these sensitivity modes is therefore not a demonstrated polyphonic solution; use a path capable of multiple simultaneous pitches and retest this recording before relying on its chords. Evidence ."
      ],
      "sha256": "93a7b5693c1afb915e8ab9a474e9571794c9bcfb384d6a994a77066fec06507b"
    },
    {
      "url": "https://audiotomidinow.com/piano-to-midi/",
      "title": "Piano to MIDI: Octaves, Chords and High Notes | AudioToMidiNow",
      "h1": "Piano to MIDI: Octaves, Chords and High Notes",
      "firstAnswerParagraphs": [
        "For piano to MIDI, check octave placement, simultaneous notes and unsupported high events separately; this single-note detector can supply a line draft, while two-hand chord transcription needs a polyphonic processing path. Evidence .",
        "Our input is a human acoustic-piano microphone recording from Werner Goebl’s Vienna 4x22 Piano Corpus , paired with its original hardware-recorded performance MIDI rather than synthesized from it. Evidence .",
        "We cut source seconds 2.20–8.20, averaged its two 44,100 Hz signed-16-bit channels, and retained a second copy at half amplitude without normalizing either. Evidence ."
      ],
      "sha256": "a2e3338e5b19b0f15cc72dd82e86465d2cfab84dd85bbfb0675ca2c6f518c445"
    },
    {
      "url": "https://audiotomidinow.com/convert-mp3-file-to-midi-slow-audio/",
      "title": "Convert MP3 File to MIDI: Slow a Single-Note Recording? | AudioToMidiNow",
      "h1": "Convert MP3 File to MIDI: Should You Slow a Single-Note Recording?",
      "firstAnswerParagraphs": [
        "To convert an MP3 file to MIDI, start with the original single-note recording; if you test a slower copy, convert both and return the slower draft to the original time scale before comparing pitches, attacks, endings and velocity. Data",
        "This method performs monophonic pitch detection, one note at a time; simultaneous polyphonic transcription requires another processing path. Data",
        "On November 12, 2026, we reused four predeclared adjacent five-second windows A–D from one archived human GuitarSet microphone performance, encoding each once to MP3 and decoding one common PCM baseline without synthesized replacement audio. Data"
      ],
      "sha256": "ef0eaf3463ae59bff1d525095dd81b1d2d712213d3241e7e3d9903aca3a9826d"
    },
    {
      "url": "https://audiotomidinow.com/wav-to-midi/",
      "title": "WAV to MIDI Converter — and MIDI to WAV | AudioToMidiNow",
      "h1": "WAV to MIDI and MIDI to WAV",
      "firstAnswerParagraphs": [
        "For WAV to MIDI, add a clear single-note WAV to the converter, inspect its note draft and download the .mid file; for MIDI to WAV, play the saved MIDI through a chosen instrument and export its audio. Data",
        "Open the WAV-compatible converter · MIDI to WAV example · Download and reproduce",
        "This site detects one pitch at a time, while the reverse examples below are explicitly synthesized offline WAVs from our saved MIDI, not a recovery of the original microphone recording or an added MIDI-upload feature. Data"
      ],
      "sha256": "2ce8ecdb4e5bc7f863ee1c2de9255a0f3f3861142a1afad3639de199988c6e0c"
    },
    {
      "url": "https://audiotomidinow.com/audio-to-midi/",
      "title": "Audio to MIDI Converter: Recorded-Note Quality Checks | AudioToMidiNow",
      "h1": "Audio to MIDI converter: check the notes you keep",
      "firstAnswerParagraphs": [
        "Audio to MIDI turns a recording into editable note events; current local note transcription can draft overlapping notes, while the five tests below belong to the archived original single-pitch detector. Current model comparison",
        "The recorded-note data below is unchanged; use the new local note transcription comparison for the current default path.",
        "Open the browser converter · Compare the five tests · Download the recordings and MIDI"
      ],
      "sha256": "3e3e4f6f9ea171774df059679443fe3cae16b9a9a3be84a7e6e35baf6d130203"
    },
    {
      "url": "https://audiotomidinow.com/m4a-to-midi/",
      "title": "M4A to MIDI: When a Local WAV Copy Helps | AudioToMidiNow",
      "h1": "M4A to MIDI: when a WAV copy helps",
      "firstAnswerParagraphs": [
        "To convert M4A to MIDI, use Local note transcription for a short recording of one instrument, then check and edit the downloaded notes; the tested AAC and sixteen-bit ALAC examples now complete locally, while an unsupported codec may still need a local WAV copy. Evidence",
        "Open the converter · See the twelve attempts · Download the comparison files",
        "The repaired default Local note transcription path produced twelve nonempty browser downloads from the same twelve inputs that previously produced six files, with three ALAC decoding failures and three no-note outcomes. Evidence"
      ],
      "sha256": "89e829f5950873fd2548e297fff31dd73645eb887fb0e2d7a24942ac848ea9f2"
    },
    {
      "url": "https://audiotomidinow.com/polyphonic-audio-to-midi/",
      "title": "Polyphonic Audio to MIDI: Notes vs Instrument Tracks | AudioToMidiNow",
      "h1": "Polyphonic audio to MIDI: notes or instrument tracks?",
      "firstAnswerParagraphs": [
        "Polyphonic audio to MIDI can produce overlapping note drafts, but this local converter does not assign them to separate source instruments; start with separate recordings or stems when you need a guitar part and a piano part. findings.json · browser-verification.json",
        "The four tests use Local note transcription with Balanced on fixed human-recording excerpts, with the unchanged original single-pitch detector retained as an explicitly offline baseline. protocol.json · offline-conversion.json",
        "Every downloaded test file is Format 0 with one track and zero-based note-channel field 0, without source track names or program-change messages. findings.json · browser-guitar.mid · browser-piano.mid · browser-mix.mid · browser-offset-mix.mid"
      ],
      "sha256": "4245b22e817f4b9dfb2353f64820009092cb772eae011678d4ee891c5924218b"
    },
    {
      "url": "https://audiotomidinow.com/audio-to-midi-velocity/",
      "title": "Audio to MIDI Velocity: Inspect Notes Before Volume | AudioToMidiNow",
      "h1": "Audio to MIDI velocity: inspect notes before volume",
      "firstAnswerParagraphs": [
        "Audio-to-MIDI velocity gives you editable strength values for individual notes; inspect those values and the source-checked notes before changing track volume. velocity-analysis.json · primary-sources.json",
        "The comparisons below are a November 17 analysis of unchanged browser exports captured on November 16, 2026, with no new recording, conversion or model run. source-index.json · browser-verification.json",
        "In MIDI 1.0, Note On carries a key number and a separate seven-bit velocity value, while channel volume uses a Control Change message. primary-sources.json · summary-of-midi-1-0-messages"
      ],
      "sha256": "d3125440a287aae0fd9e1872bd16df5822a525494cb870a5c44f486627c09782"
    }
  ],
  "closestRelated": {
    "/non-ai-audio-to-midi/": "Algorithm/model choice and local processing; secondary note correctly separates non-AI from offline. No offline loader/dependency/cache-readiness map.",
    "/audio-to-midi/": "Note-quality study, not files needed for disconnected launch.",
    "/audio-to-midi-velocity/": "Saved note-strength interpretation, not startup availability."
  },
  "noExistingOfflineFirstQuestion": true,
  "scope": "Current62-page titles/H1/first main paragraphs plus main-body offline/internet/cache search; distinct intent, not solely new slug"
}
